Diesel air compressor rental prices and information
For the rental of a diesel engine compressor , Giffi Noleggi offers you the Rotair MDVN 53K, thanks to the 2500 cc Kubota engine it can reach a compression power of 7 bar for an air output of 5200 l/min, the frame and body in electro-galvanised steel and painted with advanced technology make it even more robust and reliable over time. The 5200 l Giffi Noleggi diesel engine compressor boasts a design with modern, slender and aggressive lines, bodywork and frame in electro-galvanised steel and an advanced painting process as a guarantee of excellent conservation over time. Suitable for short and long-term rental and can be combined with different types of accessories such as the demolition hammer, the Rotair MDVN 53K powered compressor is a very useful tool in different types of work, especially in areas where there is no electricity network. Book it now directly from our online portal by following the links below or call us for further information, our qualified staff will be ready to answer all your questions.
Some technical information
Working pressure 7 Bar;
Air Yield (l/min) 5200;
Sound Level (LWA) 98;
Tank capacity (l) 50;
Hourly consumption (l/hour) 6.70;
Displacement CC 2434;
Engine (rpm) 2700;
The strengths of Rotair motor-compressors
1) Great efficiency, obtained from cutting-edge technology in terms of quality of construction materials combined with adequate design and use of the Intelligent System, this system is able to activate a pre-heating of the heat engine without the need to overload it, so that the air end starts to work only when the optimal conditions are reached. The same happens during the shutdown, the machine only turning off after a phase of depressurisation of the hydraulic circuit, thus avoiding possible failures over time.
2) Minimum consumption thanks to the exclusive "Fuel Saving System" designed by ROTAIR, this system allows, in the phase of lower air demand, to compress the air to a significantly lower pressure than in ordinary operation, thus obtaining important milestones in terms of fuel economy.
3) Silence and respect for the environment at the service of companies, ROTAIR is in fact the first manufacturer to have produced a machine with a TIER 4 FINAL engine on the US market, its technology does not require DPF filters, reducing management costs and allowing you to work in a healthier environment in compliance with all anti-pollution regulations. The internal conception of the "suspended striking body" of the exclusive ROTAIR demolition hammers ensures a very low noise level and an important reduction of the vibrations transmitted to the operating handle, this favours great advantages in terms of comfort of use and wear of the machine.